Use A 13A Socket To Charge The Peugeot Ion.
This Type 1 to 3 pin charger can charge the Peugeot Ion up to 10A, which equates to around 2.3kW. 3 pin chargers are ideally suited as a backup charging device.
Plug this charger into a 13A socket to charge your Peugeot Ion up to 10A. Adjusting the charger’s current to 6A and 8A also enables compatibility with 3 pin sockets limited to less than 10A. This feature therefore allows connection to solar panels/PV systems.
Being able to reduce the charging current reduces the heat stress on a mains socket. This is important if a 13A socket lacks a dedicated circuit connection. Or where the circuit and socket haven’t been certified for EV charging by a qualified electrician.
This 3 pin charger also has a timer, enabling charging to start from 1 to 10 hours after plugging in. It also has AC 30mA + DC 6mA (Type B) fault detection
Is This Type 1 To 3 Pin Charger Suitable For The Peugeot Ion?
Choosing The Right Charger
The Peugeot Ion has a Type 1 socket as standard, ensuring compatibility with this charger.
Charging an EV for long periods with a 13A socket may cause thermal damage to the socket. For example, the socket might overheat if the socket has damaged, if there is faulty wiring, or if the electrical circuit is overloaded. It is rare, but it does happen.
For this reason, we strongly recommend having an electrician inspect the intended socket to certify its suitability for EV charging.
We understand that, at times, charging your EV with a socket certified by an electrician may not be feasible. In such instances, we recommend charging the vehicle at 6A. It is also a good idea to ensure that both the plug and socket are not becoming excessively hot during charging.
Avoid using an extension lead or adapter. Plug the charger directly into the socket. Ensure that water does not come into contact with the prongs of the 3-pin plug or enters inside the Type 1 plug. Keep the charger dry when not in use. Before using this charger, be sure to read the user booklet included with the charger.
Please note that Peugeot did not manufacture this cable.
