LEVC 3 Pin Charging Cable / Mains charger 10A UK Plug - Type 2 Plug

Item Description and Specification

Type 2 Plug (62196-2) LEVC 3 Pin Portable Charger 10 Amp

Type 2 LEVC compatible portable charger that will charge your LEVC PHEV/BEV at your home or office using a 3 pin UK plug. Our LEVC portable chargers (also known as a mobile charging cable or granny cable) are suitable for charging your LEVC electric vehicle / hybrid / PHEV anywhere there is a Type G 3 pin UK socket. Connect the Type 2 (also known as Mennekes) plug into your LEVC electric vehicle for 10 amp charging. These LEVC home chargers are backed by a 1 year warranty. Should you need the Type 1 version of this portable charger then please go to our Type 1 home charger with 3 pin Type G (UK) plug. To view all of our LEVC charging cables please visit our LEVC chargers page.

To date, our portable chargers can be used with the following LEVC plug-in vehicles. This list is continually updated so please check your handbook, check that your vehicle socket matches the images above, or contact us if your electric vehicle is not listed:


The Duosida portable charger has been available on the market since 2012. The charger.has several safeguards for added protection while charging:

  • Overvoltage Protection.
  • Device PCB Overheat Protection.
  • Lightning Protection.
  • Overcurrent Protection
  • Water Resistant.
  • Earth Fault Protection

The 3 pin charging cable can be used in any country that supports the 3 pin plug. This portable charger is not manufactured by LEVC. Please refer to your vehicle handbook for information about charging your vehicle. Charging your LEVC vehicle using a 3 pin charging cable may cause a high load on the mains circuit if it is shared by other appliances. 3 pin chargers are therefore recommended for occasional use due to the increased risk of thermal damage caused by continuous loads at 10A. If you are looking to use a 13a socket for regular charging, please also see our Type 2 to 3 pin variable amp charging cable as these chargers have additional safety features and the current can be reduced. Please ensure that the socket where you charge your vehicle is checked by a qualified electrician to ensure that the power outlet is suitable for EV charging and is protected against the causes of overheating. We also recommend that you use a dedicated circuit with a Type B RCBO installed by a qualified electrician. Do not plug the charger into an extension cord or adapter. Reasonable care must be taken if the unit is left outside when raining. Please ensure the unit is not left in standing water.

Please read the safety information in the user manual included with this charger before using it. If you do not receive this information, please contact us.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

  • Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
  • Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
  • If you do not have your electric vehicle yet, please check with the manufacturer or dealer / seller to confirm if it is already equipped with a 3 pin charging cable.
  • Please check with your manufacturer or dealer to confirm that a Fixed Amp charger is suitable for your vehicle. Your dealer may recommend that your EV needs a charging cable that can adjust the charging current. We stock charging cables that can vary the current if this is the case.

If in doubt, please contact us via our contact page.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.

EVSE Portable Charger Specifications
EV charger type3-pin plug to Type 2 (IEC 62196-2) plug
Cable lengths available5M, 8M
IP gradeWaterproof and dust proof to IP55 grade
Rated current10 amps
Operating voltage110 - 240v
Cable thickness3G 2.5mm2 + 2 x 0.5mm2
CertificationTUV, CE and IEC tested

Write a review

Please login or register to review
  • Brand: Duosida | Weight (KG): 3.00 | Status: Available
    • Free express shipping within UK mainland. We ship via DPD to UK mainland. The majority of parcels arrive the next working day if ordered before 1pm. DPD deliver to some home addresses on a Saturday. You will receive a notification from DPD on the day of the delivery.
    • Shipping costs may apply for deliveries to the Highlands and UK islands.
    • Cable bag included with every charging cable purchased.

Click Option(s) Below & Add To Basket

  • Ex VAT:
  • £140.00
  • | Inc VAT: £168.00
Useful Links
Free EV Cable Carrier Case