BMW - Mobile Charging Cable 10A to 32A Blue 240V CEE. Type 2 Plug

Item Description and Specification

Type 2 to 32A CEE Plug Mobile Charging Cable Suitable For BMW EV

Type 2 BMW compatible portable charger that will charge your BMW PHEV/BEV using a 1 Phase 32A Blue 3 pin CEE plug, the type you will find at industrial units and campsites. Our BMW portable chargers (also known as a mobile charging cable or granny cable) are suitable for charging your BMW electric vehicle / hybrid / PHEV anywhere there is a 3 pin 32A 230V CEE socket. Connect the Type 2 (also known as Mennekes) plug into your BMW electric vehicle for up to 32 amp charging. These BMW CEE mobile charging cables are backed by a 1 year warranty. To view all of our BMW charging cables please visit our BMW chargers page.

To date, our portable chargers can be used with the following BMW plug-in vehicles. This list is continually updated so please check your handbook, check that your vehicle socket matches the images above, or contact us if your electric vehicle is not listed:

BMW 225xe, BMW 320e, BMW 330e, BMW 520e, BMW 530e, BMW 740e and 745e, BMW i3, BMW i4, BMW i5, BMW i7, BMW i8, BMW iX, BMW iX1, BMW iX3, BMW X1, BMW X2, BMW X3, BMW X5, BMW XM

This charger has several safeguards for added protection while charging:

  • Overvoltage Protection.
  • Device PCB Overheat Protection.
  • Lightning Protection.
  • Overcurrent Protection
  • Water Resistant.
  • Earth Fault Protection

The 3 pin CEE plug portable / home charger can be used in any country that supports the 3 pin CEE plug. This portable charger is not manufactured by BMW. Please refer to your vehicle handbook for information about charging your vehicle. Charging your BMW vehicle using a Type 2 to 3 pin Commando socket charging cable may cause a high load on the mains circuit if it is shared by other appliances. Please ensure that the socket where you charge your vehicle is certified by a qualified electrician to ensure that the power outlet and circuit is safe for regular EV charging and is protected against the causes of overheating. This charger is manufactured to the IEC 62752 standard with built in 30mA AC detection and 6mA DC detection. This charger can therefore be used with a circuit protected by the minimum Type A or F RCD..

The charger has adjustable current and can charge at 10A, 16A, 26A and 32A. There is also a timer that allows delayed charging from 1 to 10 hours, ideal if you wish to benefit from off peak charging rates. If you are looking for a charger that has both of the blue 230V 16A and 230V 32A CEE plugs as well as a 13A UK plug, please see our Multi adapter EV charger.

Do not plug the charger into an extension cord or adapter. Reasonable care must be taken if the unit is left outside when it is raining. Please ensure that the unit is not left in standing water and the Type 2 plug cap is emptied of any water and replaced after each use. Store the charger in a safe, dry place. Please read the safety information in the user manual included with this charger before using it. If you do not receive this information, please contact us.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

  • Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
  • Ensure that your CEE socket is 32A. The plug for this charger is not compatible with a 1 Phase 16A CEE socket or a 3 Phase 16A or 32A socket. The information for the socket should indicate 32A and display the voltage between 200V-250V. The socket cover is usually blue.
  • Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.

If in doubt, please contact us via our contact page.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.

EVSE Portable Charger Specifications
EV charger type3-pin blue 32A CEE plug to Type 2 (IEC 62196-2) plug
Cable lengths available5M, 8M
IP gradeWaterproof and dust proof to IP55 grade
Rated current32 amps, 1 Phase
Operating voltage110 - 240v
Cable thickness3G 6.0mm2 + 2 x 0.5mm2
CertificationTUV, CE and IEC tested

Write a review

Please login or register to review
  • Brand: Cebea | Weight (KG): 4.00 | Status: Available
    • Free express shipping within UK mainland. We ship via DPD to UK mainland. The majority of parcels arrive the next working day if ordered before 1pm. DPD deliver to some home addresses on a Saturday. You will receive a notification from DPD on the day of the delivery.
    • Shipping costs may apply for deliveries to the Highlands and UK islands.
    • Cable bag included with every charging cable purchased.

Click Option(s) Below & Add To Basket

  • Ex VAT:
  • £220.00
  • | Inc VAT: £264.00
Useful Links
Free EV Cable Carrier Case