Citroen - 3 Phase CEE Charging Cable. 16A 400V 11kW. Variable Amp - 8A, 10A, 13A, 16A. Type 2

Type 2 Citroen 3 Phase 400V 11kW CEE charging cable. Variable 8 amps, 10 amps, 13 amps and 16 amps

Charge your Type 2 Citroen EV using a 16A 3 Phase 400V CEE socket. 3 Phase 16A Type 2 to CEE charging cable that connects to the red 3-phase CEE / Commando sockets located in places such as industrial units. Please check your 3 Phase (red) CEE socket before buying. The 16A 3 Phase CEE plug is not compatible with the 32A 3 Phase CEE socket. Click here if you require the 3 Phase 400V 32A 22kW CEE charging cable. These CEE chargers are backed by a 1 year warranty.

The CEE plug provides a charge of up to 11kW, dependent on the onboard charging capacity of your vehicle. Please make sure that the outlet is protected by a circuit breaker. Please make sure that the device is connected directly to the CEE socket. Please also ensure that the outlet is not defective and has been tested by a qualified electrician. Please note that this charger is not manufactured by Citroen, so although this product is a compatible Citroen charger, we always recommend checking your vehicle handbook.

This charging cable is compatible with the vehicles below. This list is updated so if you do not see your vehicle, please check your handbook or check that your vehicle socket matches the images above:

Citroen E C4, Citroen C5 Aircross, Citroen Spacetourer

Multiple safeguards are built in with this Citroen portable charger to protect against damage to the vehicle, outlet and charger whilst charging:

• PCB Temperature Sensor
• Earth Fault Monitoring
• Leakage Protection
• Overcurrent Protection

• Overvoltage Protection
• Undervoltage Protection
• Lightning Protection
• Water Resistant

This Citroen CEE 3 Phase charging cable can be used in any 5 pin 16A 380V - 415V CEE / Commando socket and complies with the IEC 61851 standard for charging the Type 2 socket range of electric vehicles. You should check with your manufacturer handbook to check whether your vehicle needs to use a specific portable charger for your vehicle.

What is variable charging?

This portable charger can change power supply dependent upon the outlet that it is connected to, enabling faster charging at 3 Phase 16A or slower charging at 6A. The portable chargers will automatically stop charging the battery of your electric vehicle once it has reached full charge.

The length it will take to recharge the battery for your Citroen hybrid / electric vehicle will depend on the battery that your Citroen is equipped with. Using your socket to charge regularly over long durations can cause thermal damage if the socket / wiring is not suitable.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

• Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
• Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
• Please check whether the CEE socket for the CEE plug is suitable for this charging cable. A 1-phase CEE socket has 3 holes. A 3-phase CEE socket has 5 holes. Your CEE socket must also match the amperage of the CEE plug. This information can usually be found on the cover of the CEE socket. If you are not sure, please send us a photo of your socket and the socket cover.

If in doubt, please contact us via our contact page.

How to use the variable 16A 3 Phase charger

Please read the safety information in the user manual included with this charger before using it. If you do not receive this information, please contact us. Plug the device into into the power outlet and switch on. The required ampere setting can be selected by touching the device with the supplied RFID tag or by double clicking the button icon. Select the ampere setting to match the Ampage of your power outlet. Connect the vehicle charging plug to your Citroen. After 1 minute or once you plug the EV connector into the car, the setting is 'locked in' and will be remembered the next time you use it. To change the setting, repeat the above procedure. Your vehicle software will communicate with the device and only draw the maximum amount of power that the battery can accept.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.