Audi Etron - 3 Phase CEE Charging Cable. 32A 400V 22kW. Variable Amp - 10A, 16A, 20A, 24A, 32A. Type 2

Item Description and Specification

Type 2 Audi 3 Phase 400V 22kW CEE plug charging cable. Variable 10 amps, 16 amps, 20 amps, 24 amps and 32 amps

Charge your Type 2 Audi EV using a 32A 3 Phase 400V CEE socket. Buy a 3-phase mobile charging cable that connects to the red 3-phase CEE / Commando sockets located in places such as industrial units. The 32A 3 Phase CEE plug is not compatible with the 400V 16A socket. These CEE chargers are backed by a 1 year warranty.

You should only charge at the full capacity that the charger is capable of dependent upon the suitability of the power outlet, otherwise it may present a risk of thermal damage to your socket. Please ensure that your socket has been checked by a qualified electrician to assess the suitability of charging your vehicle using a mains socket and is protected against causes of overheating. For mains socket charging we recommend a dedicated Type B RCBO socket. Please ensure that the device is plugged directly and fully into the socket, do not use an extension lead with this device. Please note that this charger is not manufactured by Audi, so although this product is a compatible Audi charger, we always recommend checking your vehicle handbook.

This charging cable is compatible with the vehicles below. This list is updated so if you do not see your vehicle, please check your handbook or check that your vehicle socket matches the images above:

Audi Q4 e-tron, Audi Q6 e-tron, Audi e-tron Sportback, Audi e-tron GT, Audi A3 TFSI e, Audi A6 TFSI e, Audi A7 TFSI e, Audi A8 TFSI e, Audi Q5 TFSI e, Audi Q7 TFSI e, Audi Q8 TFSI e

Multiple safeguards are built in with this Audi portable charger to protect against damage to the vehicle, outlet and charger whilst charging:

  • PCB Temperature Sensor
  • Overheating Protection
  • Leakage Protection
  • Overcurrent Protection
  • Overvoltage Protection
  • Undervoltage Protection
  • Lightning Protection
  • Waterproof IP55

This Audi can be used in any 5 pin 32A 400V CEE / Commando socket and is compatible with charging the Type 2 socket range of electric vehicles. You should check with your manufacturer handbook to check whether your vehicle needs to use a specific portable charger for your vehicle.

What is variable charging?

This portable charger can change power supply dependent upon the outlet that it is connected to, enabling faster charging at 3 Phase 32A or slower charging at 10A. The portable chargers will automatically stop charging the battery of your electric vehicle once it has reached full charge.

The length it will take to recharge the battery for your Audi hybrid / electric vehicle will depend on the battery that your Audi is equipped with, which will impact on the suitability of the setting that you should use.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

  • Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
  • Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
  • Please check whether the CEE socket for the CEE plug is suitable for this charging cable. A 1-phase CEE socket has 3 holes. A 3-phase CEE socket has 5 holes. Your CEE socket must also match the amperage of the CEE plug. This information can usually be found on the cover of the CEE socket. If you are not sure, please send us a photo of your socket and the socket cover.

If in doubt, please contact us via our contact page.

How to use the variable 32A 3 Phase charger

Please read the user and safety instructions included with this charger before using it. If you do not receive this information, please contact us. Plug the device into into the power outlet and switch on. The required ampere setting can be selected by touching the device with the supplied RFID tag or by double clicking the button icon. Select the ampere setting to match the Ampage of your power outlet. Connect the vehicle charging plug to your Audi. After 1 minute or once you plug the EV connector into the car, the setting is 'locked in' and will be remembered the next time you use it. To change the setting, repeat the above procedure. Your vehicle software will communicate with the device and only draw the maximum amount of power that the battery can accept.

If you would like a Level 2 EV charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.

Audi 5 pin 3 Phase CEE Portable Charger Specifications
EV charger type5-pin red CEE to Type 2 (IEC 62196-2) connectors
Cable lengths available5M, 8M
IP gradeWaterproof and dust proof to IP55 grade
Rated current10, 16, 20, 24, 32 amps
Operating voltageUp to 400v
Cable thickness5G 6.0mm2 + 2 x 0.5mm2
CertificationTUV, CE and IEC tested
&

Write a review

Please login or register to review
  • Brand: Duosida | Weight (KG): 4.50 | Status: Available
    • Free standard shipping within UK mainland, 3 to 5 working days.
    • Express shipping to UK Mainland, 1 to 2 working days.

Click Option(s) Below & Add To Basket

  • Ex VAT:
  • £340.00
  • | Inc VAT: £408.00
Useful Links
Free EV Cable Carrier Case