Jaguar 3 Pin Charging Cable / Mains charger 10A UK Plug - Type 2 Plug

Item Description and Specification

Type 2 Plug (62196-2) Jaguar 3 Pin Portable Charger 10 Amp

Type 2 Jaguar compatible portable charger that will charge your Jaguar PHEV/BEV at your home or office using a 3 pin UK plug. Our Jaguar portable chargers (also known as a mobile charging cable or granny cable) are suitable for charging your Jaguar electric vehicle / hybrid / PHEV anywhere there is a 3 pin UK socket. Connect the Type 2 (also known as Mennekes) plug into your Jaguar electric vehicle for 10 amp charging. These Jaguar home chargers are backed by a 1 year warranty. Should you need the Type 1 version of this portable charger then please go to our Type 1 home charger with 3 pin Type G (UK) plug. To view all of our Jaguar charging cables please visit our Jaguar chargers page.

To date, our portable chargers can be used with the following Jaguar plug-in vehicles. This list is continually updated so please check your handbook, check that your vehicle socket matches the images above, or contact us if your electric vehicle is not listed:

Jaguar E-Pace, Jaguar F-Pace, Jaguar I-Pace

This portable charger has several safeguards for added protection while charging:

  • Overvoltage Protection.
  • Device PCB Overheat Protection.
  • Lightning Protection.
  • Overcurrent Protection
  • Waterproof IP55.

The 3 pin charging cable can be used in any country that supports the 3 pin plug. This portable charger is not manufactured by Jaguar. Please read your manufacturer handbook or consult your vehicle dealer to check whether you should be using a specific charger with your vehicle. Charging your Jaguar vehicle using a 3 pin charging cable causes a high load on the circuit and 3 pin chargers are therefore only recommended for occasional use. Please ensure that the socket is checked by a qualified electrician to ensure that the power outlet is suitable for charging your vehicle and is protected against the causes of overheating. We also recommend that you use a dedicated Type B RCBO socket installed by a qualified electrician. Do not plug the charger into an extension cord or adapter. Please read the user and safety instructions included with this charger before using it. If you do not receive this information, please contact us.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

  • Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
  • Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
  • If you do not have your electric vehicle yet, please check with the manufacturer or dealer / seller to confirm if it is already equipped with a 3 pin charging cable.
  • Please check with your manufacturer or dealer to confirm that a Fixed 10A charger is suitable for your vehicle. Your dealer may recommend that your EV needs a charging cable that can adjust the charging current. We stock charging cables that can vary the current between 6A to 10A if this is the case.

If in doubt, please contact us via our contact page.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.

EVSE Portable Charger Specifications
EV charger type3-pin plug to Type 2 (IEC 62196-2) plug
Cable lengths available5M, 8M
IP gradeWaterproof and dust proof to IP55 grade
Rated current10 amps
Operating voltage110 - 240v
Cable thickness3G 2.5mm2 + 2 x 0.5mm2
CertificationTUV, CE and IEC tested
 

Write a review

Please login or register to review
  • Brand: Duosida | Weight (KG): 3.00 | Status: Available
    • Free standard shipping within UK mainland, 3 to 5 working days.
    • Express shipping to UK Mainland, 1 to 2 working days.

Click Option(s) Below & Add To Basket

PRE-ORDER: This product is out of stock. If you purchase this product it is estimated to be shipped around November 24th

  • Ex VAT:
  • £150.00
  • | Inc VAT: £180.00
Useful Links
Free EV Cable Carrier Case