Peugeot EVSE Portable Charging Cable. Variable Amp - 6A, 8A, 10A, 12A, 16A - 2 Pin Schuko Plug. Type 1

Type 1 Peugeot EVSE Portable Charger Variable 6 amps, 8 amps, 10 amps, 12 amps and 16 amps

Charge your Type 1 Peugeot EV at your home or office by with a Type F 2 pin Schuko plug. Our Type 1 portable chargers (also known as a granny charger, mobile charging cable) includes a variable charging current to enable charging of your electric or hybrid vehicle at either 6 amps, 8 amps, 10 amps, 12 amps or 16 amps for faster or slower 'trickle' charging. These portable chargers are backed by a 1 year warranty.

You should only charge at the full capacity that the charger is capable of dependent upon the suitability of the power outlet, otherwise it may present a risk of thermal damage to your socket. Please ensure that your socket has been checked by a qualified electrician to assess the suitability of charging your vehicle using a mains socket and is protected against causes of overheating. For mains socket charging we recommend a dedicated Type B RCBO socket. Please ensure that the device is plugged directly and fully into the socket, do not use an extension lead with this device. Please note that this portable charger is not manufactured by Peugeot. these Type 1 portable chargers are compatible with Type 1 electric vehicles and hybrids, but we always recommend checking your vehicle handbook to ensure that your car does not require a specific portable charger.

Multiple safeguards are built in with this Peugeot home charger to ensure that both your electric vehicle and domestic socket is protected while charging:

• PCB Temperature Sensor
• Overheating Protection
• Leakage Protection
• Overcurrent Protection

• Overvoltage Protection
• Undervoltage Protection
• Lightning Protection
• Waterproof IP55

This Peugeot portable charger is the 2 pin Schuko plug version, so it can be used in any country that supports the 2 pin Euro socket (Type F).

What is the benefit of variable charging?

Adjustable amp settings are required for some electric vehicles that will only accept a lower amp setting, for example 10A. Charging your vehicle with a low amp setting also benefits from lower power consumption, which can result in savings on electricity costs. A lower amp setting will also cause less load on the mains circuit, this is important if you use a socket that is sharing a circuit with other appliances - we recommend using a socket that has its own circuit / spur. Using an adjustable amp setting may also be more suitable for solar powered charging when lower power consumption is required. The portable chargers will stop charging the battery of your electric vehicle once it has reached full charge.

The length it will take to recharge the battery for your Peugeot hybrid / electric vehicle will depend on the battery that your Peugeot is equipped with, which will impact on the suitability of the setting that you should use.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

• Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
• Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
• If you do not have your electric vehicle yet, please check with the manufacturer or dealer / seller to confirm if it is already equipped with a 3 pin charging cable.

If in doubt, please contact us via our contact page.

How to use the variable EV charger

Please read the user and safety instructions included with this charger before using it. If you do not receive this information, please contact us. Plug the device into into the power outlet and switch on. The required ampere setting can be selected by touching the device with the supplied RFID tag or by double clicking the button icon. Select the ampere setting to match the Ampage of your power outlet. Connect the vehicle charging plug to your Peugeot. After 1 minute or once you plug the EV connector into the car, the setting is 'locked in' and will be remembered the next time you use it. To change the setting, repeat the above procedure. Your vehicle software will communicate with the device and only draw the maximum amount of power that the battery can accept.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 1 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.