Chevrolet - Mobile Charging Cable 8A to 16A Blue 240V CEE. Type 2 Plug

Type 2 to 16A CEE Plug Mobile Charging Cable Suitable For Chevrolet EV

Type 2 Chevrolet compatible portable charger that will charge your Chevrolet PHEV/BEV using a 1 Phase 16A Blue 3 pin CEE plug, the type you will find at industrial units and campsites. Our Chevrolet portable chargers (also known as a mobile charging cable or granny cable) are suitable for charging your Chevrolet electric vehicle / hybrid / PHEV anywhere there is a 3 pin 16A 230V CEE socket. Connect the Type 2 (also known as Mennekes) plug into your Chevrolet electric vehicle for up to 16 amp charging. These Chevrolet CEE mobile charging cables are backed by a 1 year warranty. To view all of our Chevrolet charging cables please visit our Chevrolet chargers page.

To date, our portable chargers can be used with the following Chevrolet plug-in vehicles. This list is continually updated so please check your handbook, check that your vehicle socket matches the images above, or contact us if your electric vehicle is not listed:

Chevrolet Spark

This charger has several safeguards for added protection while charging:

• Overvoltage Protection.
• Device PCB Overheat Protection.
• Lightning Protection.

• Overcurrent Protection
• Water Resistant.
• Earth Fault Protection

The 3 pin CEE plug portable / home charger can be used in any country that supports the 3 pin CEE plug. This portable charger is not manufactured by Chevrolet. Please refer to your vehicle handbook for information about charging your vehicle. Charging your Chevrolet vehicle using a 3 pin charging cable may cause a high load on the mains circuit if it is shared by other appliances. This CEE charger is therefore recommended for occasional use due to the increased risk of thermal damage caused by continuous loads at 16A. If you are looking to use a CEE charger for regular charging, please also see our Multi adapter EV charger as these chargers have additional safety features and the current can be reduced. Before charging your vehicle with a 3-pin charger, it is important to have a qualified electrician inspect the 13A socket and electrical circuit to certify its suitability for prolonged use at 10A. This ensures that the power outlet intended for regular EV charging is suitable and is safeguarded against potential overheating issues. Do not plug the charger into an extension cord or adapter. If the unit is left outdoors in the rain, exercise caution and make sure it is not placed in standing water.

Please read the safety information in the user manual included with this charger before using it. If you do not receive this information, please contact us.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

• Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
• Ensure that your CEE socket is 16A. The plug for this charger is not compatible with a 1 Phase 32A CEE socket or a 3 Phase 16A or 32A socket. The information for the socket should indicate 16A and display the voltage between 200V-250V. The socket cover is usually blue.
• Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.

If in doubt, please contact us via our contact page.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 2 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.