Chevrolet 3 Pin Charging Cable / Mains charger 10A UK Plug - Type 1 Plug

Item Description and Specification

Type 1 Plug (J1772) Chevrolet 3 Pin Portable Charger 10 Amp

Type 1 Chevrolet compatible portable charger that will charge your Chevrolet PHEV/BEV at your home or office using a 3 pin UK plug. Our Chevrolet portable chargers (also known as a mobile charging cable or granny cable) are suitable for charging your Chevrolet electric vehicle / hybrid / PHEV anywhere there is a Type G 3 pin UK socket. Connect the Type 1 (J1772) plug into your Chevrolet electric vehicle for 10 amp charging. These Chevrolet home chargers are backed by a 1 year warranty. Should you need the Type 2 version of this portable charger then please go to our Type 2 home charger with 3 pin Type G (UK) plug. To view all of our Audi charging cables please visit our Chevrolet chargers page.

Specifications for charging plug-in hybrid and electric vehicles are continually updated but, to date, our portable chargers can be used with the following Chevrolet plug-in vehicles. We recommend that you refer to your EV handbook to ensure that it does not require a specific charging cable, or contact us if your electric vehicle is not listed:

Chevrolet Volt

The portable charger has several safeguards for added protection while charging:

  • Overvoltage Protection.
  • Device PCB Overheat Protection.
  • Lightning Protection.
  • Overcurrent Protection
  • Water Resistant.
  • Earth Fault Protection

The 3 pin charging cable can be used in any country that supports the 3 pin plug. This portable charger is not manufactured by Chevrolet. Please refer to your vehicle handbook for information about charging your vehicle. Charging your Chevrolet vehicle using a 3 pin charging cable may cause a high load on the mains circuit if it is shared by other appliances. 3 pin chargers are therefore recommended for occasional use due to the increased risk of thermal damage caused by continuous loads at 10A. If you are looking to use a 13a socket for regular charging, we recommend our Type 1 to 3 pin variable amp charging cable as these chargers have additional safety features and the current can be reduced. Before charging your vehicle with a 3-pin charger, it is important to have a qualified electrician inspect the 13A socket and electrical circuit to certify its suitability for prolonged use at 10A. This ensures that the power outlet intended for regular EV charging is suitable and is safeguarded against potential overheating issues. Do not plug the charger into an extension cord or adapter. If the unit is left outdoors in the rain, exercise caution and make sure it is not placed in standing water.

Please read the safety information in the user manual included with this charger before using it. If you do not receive this information, please contact us.

Charging cable checklist

To ensure that the cable you purchase is right for you, please read the following checklist:

  • Make sure the charging cable is compatible with your vehicle. The photos at the top of the page show you what the pins in the connectors look like so you can match the cable to your vehicle.
  • Make sure that the length of the cable is sufficient to reach the charging socket of your vehicle. We recommend allowing at least half a metre so that the cable is not overstretched.
  • If you do not have your electric vehicle yet, please check with the manufacturer or dealer / seller to confirm if it is already equipped with a 3 pin charging cable.
  • Please check with your manufacturer or dealer to confirm that a Fixed Amp charger is suitable for your vehicle. Your dealer may recommend that your EV needs a charging cable that can adjust the charging current. We stock charging cables that can vary the current if this is the case.

If in doubt, please contact us via our contact page.

If you would like a Mode 3 charger that connects from a charging station to your EV, browse our range of Type 1 charging cables.

For trade enquiries or bulk purchases please contact us for a quote on our Trade Enquiries page.

EVSE Portable Charger Specifications
EV charger type3-pin plug to Type 1 (J1772) plug
Cable lengths available5M, 8M
IP gradeWaterproof and dust proof to IP55 grade
Rated current10 amps
Operating voltage110 - 240v
Cable thickness3G 2.5mm2 + 2 x 0.5mm2
CertificationTUV, CE certified
 

Write a review

Please login or register to review
  • Brand: Duosida | Weight (KG): 3.00 | Status: Available
    • Free express shipping within UK mainland. We ship via DPD to UK mainland. The majority of parcels arrive the next working day if ordered before 1pm. DPD deliver to some home addresses on a Saturday. You will receive a notification from DPD on the day of the delivery.
    • Shipping costs may apply for deliveries to the Highlands and UK islands.
    • Cable bag included with every charging cable purchased.

Click Option(s) Below & Add To Basket

  • Ex VAT:
  • £155.00
  • | Inc VAT: £186.00
Useful Links
Free EV Cable Carrier Case